Product
 

Process Control Valves

Valve Positioner




Input Pressure : 30 PSI
Outpur Signal : 3-15 PSI
Output going to Diaphragm Actuator : 3-15 PSI, Electronic Position Indicator
Flexible Actuator travel adjustments, NEMA 4X (IP65) enclosure.
Standard process inputs, Field reversible.

E to P Converter




Input Air Pressure : 30 PSI
Outpur Air Pressure : 3-15 PSI
Input Signal : 4-20 mA
Compact Size, Low weight, Low air consumption, Standard Process inputs.
Field reversible, Split ranging, Flexible Zero & Span adjustments.

Electro-Pneumatic Valve Positioner Combination Unit



Input Air Pressure : 30 PSI
Outpur Air Pressure : 3-15 PSI
Input Signal : 4-20 mA
Extremely vibrant resistance design, Precise Calibration with simple Span & Zero adjustments.
Corrosion Resistance Aluminium Die cast body



Temperature Control System



`
SOLENOID VALVE
Type : 2/3 Way Direct Operated
Working Pressure : 10Kg
MOC : I.C. CF8, Aluminum
Ends : Screwed
Size : 1/4" / 1/2"
Coil Voltage : 12, 24, 110, 230 AC/DC, 11W, 50Hz
Applications : Air, Gas
SENSOR - PT100
PT-100 RTD Sensor
2/3 Wire type
Diameter & Length as required with adjustable gland Aluminum Terminal Cover head

Panel Board



Micro Controller based Double Display
Size : 48 x 96, 48 x 48, 96 x 96 Panel Cut
Single set point, Two set point independent for each
Input : Sensor PT-100 / As required
Controller : Will be suitable for both
Pneumatic & Motorised Valves.
Supply : 230V A.C., 50hz
Electrically connected for ready to use system

Mountings

  • Temperature Controllers, PID Controllers willbe fitted inside the panel.
  • Valve Positioner will be fitted on the valve and Pneumatically connected.
    The valve is calibrated for ready to use in the process.
  • E to P converter will be fitted on the valve pneumatically connected.
    The Valve is caliberated for ready to use in the Processs.
  • Electro-Pneumatic Valve Positioner will be fitted on the Valve and Pneumatically connected.
    The Valve is calibrated for ready to use in the Process.
  • Sensor will be supplied separately.
  • Solenoid Valves will be fitted on the Diaphragm Actuator.
  • Filter Regulator unit can be fitted on the Valve or supplied separately for main Air line